Product Application

Permanently flexible and non-yellowing ground.
No prior sizing needed.
Can be applied to a wide range of surfaces including raw canvas, wood and paper.
Can be used as rabbit skin glue substitute.
A minimum of 2 coats are recommended prior to oil painting. Water content may swell canvas fibres and give the surface a coarser surface. To smooth, lightly sand with flat-faced pumice stone and apply a second priming coat.

Drying time

30-60 minutes to touch dry. Full drying: 72 hours.

Thinning

For best results thin with distilled water. May be substituted with tap water (tap water may contain impurities)

Clean Up

Clean brushes with warm water immediately after use